Filter
Top Products
Printer Panel 1
– 27 –
4581-7777-01
10. Adjusting the Options
NOTE
• With the printer, the adjustments of each option are performed with the servicing
equipment. Therefore, start up the External Panel Controller, and make the adjust-
ments with the appropriate setting.
• After adjusting the options, restart the printer.
10.1 Checking the Paper Reference Position for PF-118
NOTE
• For details on the installing PF-118, refer to its Setup Instructions.
• To adjust PF-118, follow the instructions below.
1. Load Letter-size (or A4-size) paper into the paper drawer of the optional paper feed
unit.
2. Check that the External Panel Controller appears in the computer screen, and then
display the Tech. Rep. Mode screen. (For details about displaying the Tech. Rep.
Mode screen, refer to the Service Manual.)
5. Click “Left Margin”.
6. Select the key for the paper drawer that is to be adjusted, and then click the Start key
in the External Panel Controller.
A test page is printed.
* If two optional paper feed units are installed, perform the same check and adjustment
procedures in steps 7 and onward also for the fourth drawer.
C4581P003CA
3. Click “Machine Adjust”.
C4581P004CA
4. Click “PRT Area”.
C4581P014CA
C4581P015CA