Filter
Top Products
3-11
3. Basic Functions
Making Copies Chapter 3
Manual Bypass Copying
• Use the Manual Bypass to make copies on paper not loaded in any tray, or to copy onto OHP
transparencies or any other special paper.
• The setting of copy paper sizes is needed for manual bypass copying.
◆
Types of Paper
• Plain Paper (20 lb to 24 lb)
• Thin Paper (20 lb)
• Thick Paper
Thick Paper 1 (24 lb to 34 lb), Thick Paper 2 (50 lb to 80 lb cover)
• OHP films (recommended brand)
◆
Paper Size
•11
×
17L to LetterC and 12
×
18L
• Postcard
• Max. Size: 11-3/4
×
17
• Minimum Size: 5-3/4
×
7-1/4
◆
Capacity of the Manual Bypass Tray
• Thin Paper, Plain Paper, Thick Paper 1 ... Up to 90 sheets
• Plain Paper/Thin Paper (once-copied paper), Thick Paper 2 ... Up to 50 sheets
• OHP films ... Up to 40 sheets.
Place the original on the Original Glass.
Swing down the Manual Bypass Tray.
Insert a neat stack of copy paper into the
Manual Bypass Tray until it stops and slide
the Paper Guide Plates to the size of the copy
paper.
NOTES
• Load the OHP films so that the front side (on
which the white line is printed) faces up in the
direction as shown.
• Use only the recommended OHP films.
• Only Plain Paper can be used for 2-sided
copies.
• When inserting paper with one side previously
printed, load the paper stack so that the blank
side faces down.
• Make sure that the top level of the original
stack does not exceed the ▼ marking.
Copy Paper that Can be Used for Manual Bypass
Using the Manual Bypass Tray
1
2
1144O012AA
3
1144O013AA
1179O056AA