Filter
Top Products
App - 8
Appendix 3 Steps to Create a Program for L Series
APPENDICES
(6) Start up GX Works2 and open the project generated with A/QnA to Q
conversion support tool.
[Project] [Open Other Data] [Open Other Project]
(7) Since the opened project is set to QCPU, change the type to LCPU.
[Project] [Change PLC Type]
Click "OK" button.
POINT
A refresh program created with A/QnA to Q conversion support tool generates the
program utilizing SM1224, which turns to SM1255 by changing the PLC type with
GX Works2.
After changing the PLC type with GX Works2, substitute SM1255 in the ladder
program with SM1224.
(8) In the confirmation window that appears (shown below), click "Yes" button.
Item Description
PLC Series Select "LCPU".
PLC Type Select the LCPU to be used.