Filter
Top Products
A - 2
[INSTALLATION PRECAUTIONS]
[WIRING PRECAUTIONS]
CAUTION
● Use the programmable controller in the environment conditions given in the general specifications of
the User's Manual for the CPU module used.
Failure to do so may cause an electric shock, fire, malfunction, or damage to or deterioration of the
product.
● Insert the module fixing projection into the module fixing hole in the base unit to mount the
module.(For the AnS series module, fix it to the base unit with screws within the specified torque.)
Incorrect module mounting may cause a malfunction, failure, or drop of the module.
● Be sure to shut off all phases of the external power supply used by the system before mounting or
removing the module.
Failure to do so may damage the module.
● Do not directly touch any conductive part or electronic component of the module.
Doing so may cause a malfunction or failure of the module.
WARNING
● Be sure to shut off all phases of the external power supply before installation or wiring.
Failure to do so may result in an electric shock or damage to the product.
CAUTION
● Properly solder a connector for coaxial cable.
Failure to do so may cause malfunction.
● Be careful to prevent foreign matter such as dust or wire chips from entering the module.
Failure to do so may cause a fire, failure or malfunction.
● Be sure to place the communication cables or power cables in a duct or clamp them.
If not, dangling cables may swing or inadvertently be pulled, resulting in damage to the module or
cables, or malfunctions due to poor cable contact.