Filter
Top Products
EN-33
FEATURE menu
AUTO
AUTO
AUTO
opt.
MENU POSITION
CINEMA MODE
REMOTE POSITION
ASPECT
RESET ALL
English
LANGUAGE
A
Ë
OK
DISPLAY
INPUT
1.
MENU DIMMER
OFF
FEATURE
PASSWORD
FUNCTION
ITEM SETTING FUNCTION
ASPECT AUTO Select to change the aspect ratio automatically depending on the input
signal.
4:3 Select to project images with an aspect ratio of 4:3.
16:9 Select to project images with an aspect ratio of 16:9. (Linearly stretched.)
ZOOM1 Select to enlarge and project images of CinemaScope size.
ZOOM2 Select to enlarge and project images of Vista size.
STRETCH Select to enlarge to 16:9 and project of the images with an aspect ratio of
4:3. (Non-linearly stretched.)
ANAMORPHIC1
This mode is suitable for viewing 2.35:1-size images using the anamorphic
lens.
Use the p or q key to adjust the vertical display position.
This mode doesn’t support input signals from personal computers.
ANAMORPHIC2 This mode is suitable for viewing 16:9- or 4:3-size images or images input
from personal computers using the anamorphic lens.
PASSWORD FUNCTION
2 options Use to enable or cancel the password lock. See page 41 for details.
MENU POSITION
2 options Use to change the position of the menu.
MENU DIMMER
ON / OFF Use to reduce the brightness of the menu.
CINEMA MODE AUTO The film mode will be automatically activated when a film source signal is
input.
Select AUTO for normal use.
When flicker occurs on the screen or jaggies on slanting lines are
remarkable, select FILM when a film source signal is input or select VIDEO
for other signals.
VIDEO The film mode will not be activated.
FILM Fixed to the film mode.
REMOTE POSITION
AUTO / FRONT /
REAR
Sets the position of remote infrared receiver to front or rear.
LANGUAGE 10 languages Use to select the language used in the menus.
RESET ALL
OK
Use to reset the settings of the menu (excluding PASSWORD FUNCTION,
LANGUAGE, and NETWORK) to the factory setting values.
• When SCREEN SIZE of ADVANCED MENU is set to CINEMA SCOPE (2.35:1) in the IMAGE menu, STRETCH
cannot be selected for ASPECT.
• It may take a little while to carry out RESET ALL in the FEATURE menu.
Menu operation (continued)