Filter
Top Products
EN-8
Remote control
1 STANDBY ( ) button
2 ON ( I ) button
3 COMPUTER button
4 HDMI 1/2 button
5 PICTURE MODE button
6 F.R.C. button
7 AV MEMORY buttons
8 p, q, t, u buttons
9 MENU button
10 CONTRAST button
11 BRIGHTNESS button
12 GAMMA button
13 BRILLIANT COLOR button
14 3D MODE button
15 COMPONENT button
16 COLOR MANAGEMENT button
17 ENTER button
18 IRIS button
19 ASPECT button
20 COLOR TEMP. button
21 SHARPNESS button
22 COLOR button
23 AUTO POSITION button
24 ANAMO button
Preparing your projector (continued)
19
20
21
22
23
24
17
14
18
16
15
1
2
3
4
5
6
7
8
9
10
11
12
13
Important:
• Whenyoupressanybuttonontheremotecontrol,thebuttonsontheremotecontrolarelit.Waitapprox.6
seconds after releasing the button to turn them off.
Picture quality selection buttons
Using the following picture quality selection buttons, you can easily select the preset quality setting. Every time you
press the button, the setting switches. Alternatively, you can select the picture quality setting using the IMAGE menu.
(See page 30.) Items in the menus are shown in parentheses below.
PICTURE MODE (PICTURE MODE)
... Switches the picture mode.
The following button switches the setting only when the picture mode is set to AV MEMORY1, AV MEMORY2, or AV
MEMORY3.
IRIS (AUTO IRIS) ............................... Switches the auto iris mode.
Picture quality adjusting buttons
When you press any of the following picture quality adjusting buttons, the screen for adjusting the picture quality
appears. Adjust the picture quality by pressing the t and u buttons. The picture quality adjustment can be made
alternatively in the IMAGE menu. (See page 30.) Items in the menus are shown in parentheses below. You can adjust
the picture quality only when the picture mode is set to AV MEMORY1, AV MEMORY2, or AV MEMORY3.
CONTRAST (CONTRAST) ................ Adjusts the contrast of the projected image.
GAMMA (GAMMA MODE) ................ Selects one of the preset gamma mode. Adjustment of USER mode is also
available. (See page 39.)
BRIGHTNESS (BRIGHTNESS) ......... Adjusts the brightness of the projected image.
COLOR TEMP. (COLOR TEMP.) ....... Selects one of the preset color temperatures. Adjustment of USER mode is also
available. (See page 38.)
COLOR (COLOR) .............................. Adjusts the color thickness of the projected image.
SHARPNESS (SHARPNESS) ............ Adjusts the sharpness of the projected image.
F.R.C. (FRAME RATE CONVERSION)
..... Every time you press the button, the setting of FRAME RATE CONVERSION
switches. By pressing the ENTER button and then t or u button with TRUE
VIDEO or TRUE FILM selected, you can adjust the effect level of the motion
interpolation for the frame rate conversion.