Filter
Top Products
EN-32
3-1. Displaying JPEG images
Display thumbnails in the thumbnails screen.
Move the red frame using the // buttons to select the file you want to play (show) and press the ENTER
button. The image changes and a slide appears.
To open a folder, move the red frame to the target folder and press the ENTER button.
You can move to a folder located 3 levels lower in the same method.
* You cannot open a folder at the lowest level (3rd level).
To return to folder at a higher level, move the red frame to a folder indicated with a [RETURN] mark and press
the ENTER button.
Use the / buttons to change the displayed slide. ( displays the previous slide and displays the next slide.
These buttons cannot be used during a slide show.) Non-supported files (magnifying glass display) or movie
files will be skipped.
Pressing the button rotates the displayed slide in increment of 90 degrees to the right. The rotation data is not
applied to a different slide or images in a different folder.
Press the ENTER button to return to the thumbnail display.
3-2. Starting a slide show
If [AUTO START] in the [SLIDE SHOW] menu is set to [ON], a slide show will start by inserting an SD card and
changing the input mode to “SD Viewer”, or if the input mode is preset to “SD Viewer”, a slide show will start
immediately when an SD card is inserted.
A slide show can be started when [AUTO START] is set to [OFF] by displaying a JPEG image and pressing the
button. A slide show will start from the file currently displayed.
Press the ENTER button to return to the thumbnail display.
Press the Still button on the remote control to pause a slide show. The paused status can be cleared by pressing
any button other than the ENTER button.
Other than the above, the [SLIDE SHOW] menu offers [REPEAT SETTING], [INTERVAL TIME], and [TRANSITION
EFFECT] settings.
The file subjected to the slide show is the JPEG file in the current folder.