Mitsubishi Electronics PK20 Projector User Manual


 
EN-4
WARNING
Only use the attached specified AC adapter and power
cord. If you use another AC adapter and power cord, it
may cause interference with radio and television reception
or damage your projector.
The attached AC adapter and power cord are to be used
exclusively for this product. Never use them for other products.
DO NOT LOOK DIRECTLY INTO THE LENS WHEN
THE PROJECTOR IS IN THE POWER ON MODE.
CAUTION
Not for use in a computer room as defined in the Standard
for the Protection of Electronic Computer/Data Processing
Equipment, ANSI/NFPA 75.
When using the projector in Europe:
COMPLIANCE NOTICE
This Projector complies with the requirements of the EC
Directive 89/336/EEC “EMC Directive” as amended by
Directive 92/31/EEC and 93/68/EEC, and 73/23/EEC “Low
Voltage Directive” as amended by Directive 93/68/ EEC.
The electro-magnetic susceptibility has been chosen at a
level that gains proper operation in residential areas, on
business and light industrial premises and on small scale
enterprises, inside as well as outside of the buildings. All
places of operation are characterised by their connection
to the public low voltage power supply system.
Your MITSUBISHI ELECTRIC product
is designed and manufactured with high
quality materials and components which
can be recycled and reused.
This symbol means that electrical and
electronic equipment, at their end-of-
life, should be disposed of separately
from your household waste.
Please, dispose of this equipment at
your local community waste collection/
recycling centre.
In the European Union there are
separate collection systems for used
electrical and electronic product.
Please, help us to converse the
environment we live in!
Note: This symbol
mark is for EU
countries only.
This symbol mark is
according to the
directive 2002/96/EC
Article 10 Information
for users and Annex
IV.