Filter
Top Products
EN-35
To move the image vertically:
Adjust VERT. POSITION in the SIGNAL menu. Press the button to move the image upward. Press the button to move
the image downward.
When the image flickers:
Adjust FINE SYNC. in the SIGNAL menu.
Simple adjustment method
1. Select HORIZ. POSITION in the SIGNAL menu.
2. Press the or button to adjust the horizontal start position (or the left side of the image).
3. Select TRACKING in the SIGNAL menu.
4. Press the or button to adjust the horizontal end position (or the right edge of the image).
5. Repeat steps 1 to 4 for optimum adjustment results.
6. Select VERT. POSITION in the SIGNAL menu.
7. Press the or button to adjust the vertical start position (or the upper edge of the image).