Filter
Top Products
Enabling/Disabling the Backlight –––––––––––––––––––––––––––––
The display backlight can be enabled for dimly lit areas. This
feature is disabled when you receive the printer.
If there is no activity at the keypad or scanner for a period of
time, the backlight shuts off. The backlight turns on when you
resume activity. The default for shutdown is 30 seconds.
nContact your System Administrator to see if your application
uses this feature.
To enable the backlight:
1. Press e to select Backlight from the CONFIG.
MENU. You will see:
Backlight
Disable
2. Press 1 to select Enable or 2 to select Disable.
3. Press e .
Enabling/Disabling On-Demand Mode ––––––––––––––––––––––––
On-Demand mode is a print mode in which one label prints
each time you remove the previously printed label.
To enable On-Demand mode:
1. From the CONFIG. MENU, press > until you see:
Backlight
On-Demand
6030 Operator’s Handbook
6-2