Filter
Top Products
2. Press e. You will see:
BATTERY = ###
The acceptable operating range is 780-995. However, if a
fully charged battery displays an amount below 900, the
battery may be losing its recharging capacity. Use another
battery, make a note of the number, and call Service.
3. Press b.
Testing the Scanner
The scanner test checks the functionality of the scanner.
nUses scanner setting All. See "Selecting Bar Codes for
Scanning" in Chapter 6.
To run the Scanner test:
1. Set the scanner to All. See "Selecting Bar Codes for
Scanning" in Chapter 6.
2. From the HDW TEST MENU, press > until you see:
Battery
Scanner
3. Press e you will see SCAN A BARCODE.
4. Aim the scanner at a bar code and press the trigger.
✦
If the scan is successful you will see the bar code data
on the second line of the display.
✦
If the scan is unsuccessful you will see the message
NO DATA RECEIVED on the second line of the display.
5. Press b.
6030 Operator’s Handbook
10-16