Monarch 6030TM Printer User Manual


 
2. Remove your supply.
3. Open the label deflector by gently pressing down with two
fingers.
4. Clean the platen roller and remove any adhesive buildup.
5. Turn the platen roller with your finger, and then continue
cleaning.
6. Reload your supply and close the label deflector and
supply cover.
To clean the feed and pinch rollers:
Turn the platen roller. This turns the pinch roller. Remove
any adhesive buildup as the rollers turn.
Allow the printer to dry before reloading your supplies.
Platen
Roller
6030 Operator’s Handbook
7-6