Filter
Top Products
2-4 NPort Server Lite User’s Manual
Figure 2-2b. NPort Server Lite—Wall Mounting Brackets (top view)
DIN Rail
Figure 2-3. Din Rail Mounting Bracket
NPort Server Lite can also be mounted on a standard 35-mm DIN Rail. First use two
screws to attach the DIN Rail bracket to the metal plate (Fig. 2-3). Since the screw heads
are beveled, and the holes in the plate are countersunk, the tops of the screws will be flush
with the metal plate.
Figure 2-4. Din Rail Mounting Bracket—Orientation of Metal Plates
This allows the metal plate (now with the DIN Rail bracket attached) to be screwed to the
bottom of the server in such a way that it does not stick out over the edge of the server. Use
three screws to attach the metal plate to the bottom of NPort Server Lite, with the
orientation as shown in Fig. 2-4.