Filter
Top Products
Installation and Configuration
NPort Server Lite User’s Manual 4-39
6. The server information will now appear in the Selected NPort Server information
window.
. Note: Click the Search button before selecting a server from the pull down menu if you add
more NPort Server Lites after the Diagnostics utility is initiated. Otherwise the new
server will not be listed in the pull down menu.
7. The check box for all ports needing to be tested should be checked (refer to the figure
in step 5). For those ports that no longer need to be tested, click inside the checked box
to remove the check mark.
8. If you do not need to change any Test Items or Communication Parameters, click
OK to return to the NPort Server Diagnostics window. Otherwise continue the
configuration process in the next sub sections.
Test Item Selection
Click the Test Item tab in the Diagnostic Config window.
The tests that you want to run should be checked. Add or remove check marks as necessary
by clicking inside the appropriate check box.