Filter
Top Products
Installation and Configuration
NPort Server Lite User’s Manual 4-41
Last Step
1. Click OK in the bottom right corner of the Diagnostic Config window to return to the
NPort Server Diagnostics window. All NPort Server Lites that are to be tested will be
listed in the left info box as shown below.
Viewer Status and Diagnose
Before starting the testing procedure, you can check the status of your NPort Server Lite.
1. Either click on the Diagnose menu and then choose Server Status, or click on the
toolbar Server Status icon to open the NPort Server Status window. The
server information displayed is: server name, IP address, model number, serial number,
and firmware version. The port information displayed is the COM name (COM3 in the
example below), serial port interface, and current port status.