Filter
Top Products
Installation and Configuration
NPort Server Lite User’s Manual 4-17
2. If the server is at a remote site, you must select Manually Enter the IP address of
NPort Server and then click on Next. Enter the server’s IP address in the text input
box, and then click on Next to continue.
3. First-time installers will jump to the next step directly. If the server being set has a
password, you will see a password protected screen. If you are the server administrator,
select ‘Yes’ and enter the password. However if you’re NOT the administrator, select
‘No’ and continue to install ports.
. Note: If you’re not the administrator, be sure to ask the administrator to add you to the
access control list of the server.
4. Confirm that the displayed IP address is correct, or key in a dedicated IP address
assigned by your LAN administrator.
. Note: If you have a DHCP server on your local network, be sure to consult with the DHCP
administrator to assign dedicated IP addresses to the server, and to the computers
connected to the server.