Filter
Top Products
Installation and Configuration
NPort Server Lite User’s Manual 4-25
. Note: If you want to allow the ports to be accessed by all users, simply empty the access
control list.
To grant access, you must first enter the Access Control Page:
1. Run NPort Server Lite Manager.
2. Click on the server you want to modify.
3. Click on the toolbar Server Properties icon.
4. Select the Access Control tab.
5. The screen will show a list of ports, and two methods of adding permission.
When adding access permission, you may either view the access control list by Port, or
by IP address. These two approaches also apply to the procedure for adding new hosts.
The next two sections describe how to add hosts using both approaches.
Configuring Through View by IP Address
Using the view access control list by IP address option displays the access control list by
giving the server IP addresses. It is clear to see which IP addresses have been granted
access to which ports, and which IP addresses are allowed onto the server.
Adding Access Permission to One Host
If a particular host is permitted access to all ports on a specific server, we recommend that
you configure using the view access control list by IP address option.
1. Click on the Access Control tab, and then select the IP address option next to View
access control list by: