Filter
Top Products
MRV Communications, Inc. – Installation Manual
27
Figure 2.4: Unacceptable Mounting
Mounting Environment & Stability
1. When deciding the mounting location, you should look on the rooftop
for vibration sources such as compressors, elevators, motors, and try to avoid
them.
2. Photograph the mounting location so as to select the best mounting
option.
Figure 2.5 shows mounting locations on a rooftop in descending order of
preference. Location 1 is the best; location 7 is the worst.
Figure 2.5: Mounting Locations in Order of Preference
Note:
If the only option to mount the TereScope is at points 5, 6 or 7, it has to be mounted at least 2 m above the rooftop to o
v
the roof scintillation and eventually have people crossing the link beam (If possible, avoid placing the TereScope on the mast).