Multi-Tech Systems ISI3334/4 Network Card User Manual


 
ISI3334/4 Hardware/Driver Installation Manual
12
2.1 Safety Warnings
1. Never install telephone wiring during a lightning storm.
2. Never install telephone jacks in wet locations unless the jack is
specifically designed for wet locations.
3. This product is to be used with
UL
and
CUL
listed computers.
4. Never touch uninsulated telephone wires or terminals unless the
telephone line has been disconnected at the network interface.
5. Use caution when installing or modifying telephone lines.
6. Avoid using a telephone (other than a cordless type) during an
electrical storm. There may be a remote risk of electrical shock
from lightning.
7. Do not use the telephone to report a gas leak in the vicinity of
the leak.
2.2 MultiModemISI Installation
This chapter provides you with procedures for installing the
MultiModemISI card(s) in your ISA or EISA bus personal computer
(or compatible with 16 bit ISA slot).
Hardware installation involves:
1) Opening your PC.
2) Setting card configuration (determining I/O address DIP-Switch
setting and IRQ jumper setting).
3) Installing the card into the PC.