Filter
Top Products
Chapter 3 - MultiModemISI Driver Installation
35
3.7 Multi_Setup Utility
This section guides you through the Multi-Tech Setup Utility for SCO
Open Server 5.0 systems. The Multi_Setup utility lets you set
various parameters for Multi-Tech's ISI card ports; such as,
transparent printing options, high baud settings (above 38400 bps),
and hardware flow control. All the changes made by the Multi_Setup
utility are in effect until the system is rebooted or until the option is
changed using Multi_Setup.
Multi_Setup has a database of “on” and “off” strings for the
transparent printing option through commonly-used terminal
emulations. If terminal type in use is not recognized by Multi_Setup,
Multi_Setup checks the
termcap
database to extract the “po” and “pf”
escape sequences for transparent printing through that terminal
type.
Multi_Setup options are provided in Table 3-7.
Table 3-6. Multi_Setup Options
Command-line
Options Feature
-h Prints the Help file.
-a Displays current setting for printer
configuration options.
-c cps Specifies the printer speed in characters per
second. Default value of 100 cps.
-b bufsize Specifies the buffer size for transparent
printing. Valid range is any integer greater
than 0, as specified by your printer. The
default value is 250 characters.
-T term Sets the transparent printing escape
sequences to that of the terminal specified
by term. This parameter has access to the
look-up table in the terminal database built
into Multi_Setup. If the terminal is not
recognized by Multi_Setup, then the
termcap database is used to find the On and
Off escape sequences for transparent
printing.