Filter
Top Products
Appendix B - ISI Testing Utilities
59
Appendix B - ISI Testing Utilities
This disk contains two files that are to be used in conjunction with ISI
boards. These files are described in two sections: 1) Operation with
factory default settings, and 2) Operation with other than the factory
default settings. These files are:
ISI3334.BIN
3334TERM.EXE
Note: This program is a DOS utility.
1. OPERATION WITH FACTORY DEFAULT SETTINGS
The 3334TERM.EXE program is a utility program that emulates a
terminal to test the connection from PC keyboard to ISI board to
Modem to ISI board to PC display. Prior to executing 3334TERM the
program must be executed to initialize the ISI board (when the ISI
board’s factory settings are unchanged).
The following screen is displayed:
ISI3334 Terminal Utility Version 1.00
Copyright (C), 1990-94 Multi-Tech Systems, Inc
Loading Firmware to ISI3334 located at address 200h
Loading default file: ISI3334.BIN
ISI3334 loading firmware.....
ISI3334 verifying firmware.....Verify OK.
ISI3334 firmware loaded successfully.
ISI firmware loaded successfully...
Enter 1 to 8 for eight ports ISI.
Enter port number ?
Note: This program must be run anytime the PC is powered down
or rebooted.