Filter
Top Products
ISI3334/4 Hardware/Driver Installation Manual
62
The first step in this utility is to identify the port to be tested. In order
for the test to function, the selected port must be connected to a
modem that is switched on. The valid entries for the ISI are 1
through 8. Once a port has been selected, the following is
displayed:
Enter 8 = 1200 baud
Enter 11 = 2400 baud
Enter 15 == 9600 baud
Enter 16 == 19200 baud
Enter 17 == 38400 baud
Enter 18 == 57600 baud
Enter 19 == 115200 baud
Enter the baud rate you wish to run?
This step allows selection of a baud rate for testing. Once a baud
rate has been selected, the following is displayed:
ISI Terminal Utility is ready. Press F10 to Exit.
This message indicates that keyboard entry can now be performed;
any characters typed on the keyboard will be sent through the ISI
board to the modem and then returned to be displayed on the PC’s
screen. When operation has been verified, the utility can be exited
by pressing the F10 key).