Filter
Top Products
Chapter 3 – Configure and Manage Using a Web Browser
RouteFinder RF500S User Guide 28
– Modem Settings
A modem can be used as a dialup backup to the Cable/xDSL connection. If you would like
to use a modem backup, enable the modem settings function. Check the
Dialup Modem
When Cable/xDSL Is Not Connected box. Then input the ISP account settings.
Note: If you change the baud rate settings, please check the initial string. (You can refer
to your modem manual or TA.)
– Save and Restart
After you have finished making all the changes on the various pages, click Save & Restart
to save the settings and restart the device. After restarting, the device will function
according to the saved settings.
During the save and restart process, system messages will let you know that you have
successfully configured the settings for the device and saved the settings.
During the startup process, the LEDs of the device will blink. Please
wait until the blinking
of the device stops before proceeding.