Filter
Top Products
Chapter 5 – RouteFinder Manager
RouteFinder RF500S User Guide 76
Network Protocols
You must have at least one network protocol enabled for the dial-in service. The default
enables both TCP/IP and IPS/SPX. If you do not need both protocols, you may disable one
of them. If you are connecting to a Netware Server, IPX/SPX must be enabled.
IPX/SPX Frame Type – The RF500S can automatically detect what kind of IPX/SPX
frame type you are using. You may manually select a frame type by using the list box.
Remote Client Authentication
Remote authentication settings allow you to specify how you would like to authenticate
remote users. You may select
Use Local Client List or Use RADIUS Authentication (refer to
Remote Connection Authentication Settings in this chapter for more information). Choosing
RADIUS configuration allows you to use the user information (user name, password, IP
address, etc.) stored on a separate RADIUS server on the network.
Click OK when complete.