Filter
Top Products
Chapter 4 – Software Installation and Configuration
RouteFinder RF500S User Guide 55
6. The Asynchronous Port Function screen displays. Select Remote Access, IP Routing(NAT
Enabled) or IP Routing (NAT Disabled).
Figure 6 – Asynchronous Port Function
• Select Remote Access to allow remote users to dial-in to the network to access
resources as if the remote user is connected to the network locally. Continue with
the Remote Access instructions.
• Select
IP Routing (NAT Enabled) to allow all users in the two IP segments (LAN and
WAN Ethernet) to share one IP address to the Internet. You may also select this
option to use the serial async port for dial backup in the event the DSL or cable
modem becomes unavailable.
• Select
IP Routing (NAT Disabled) to connect other IP segments through the serial
async port.
Note: The IP Routing (NAT Enabled) feature of the serial async port is valid only if the
WAN port is configured as NAT Disabled.
Click Next>>.