Filter
Top Products
Chapter 4 – Software Installation and Configuration
RouteFinder RF500S User Guide 64
Testing Your Connection
When you click the Run Monitor button, the RouteFinder Monitor program loads.
1. To test your current settings, select Test Connection. Select Connect Port 1 to test
the WAN port. Select Connect Port 2 to test the serial async port. The monitor
activity will appear in the display window. Refer to the RouteFinder Monitor chapter in
this User Guide for additional information about the monitoring capabilities of the
RF500S.
2. After successfully using the Test Connection option in Run Monitor, refer to the LAN
Client Settings chapter of this User Guide to continue with your installation by
configuring your LAN workstations.
Note: If a problem occurs while testing your connection, or you need to configure more
advanced options for your RouteFinder, use RouteFinder Manager by selecting
Programs |
RouteFinder Manager.