Filter
Top Products
Chapter 4 – Software Installation and Configuration
RouteFinder RF500S User Guide 52
3. The Device IP Address screen displays.
Figure 3 – Device IP Address
• Enter your local internal network’s IP address for this device.
The Setup Wizard will automatically detect the first three octets of your local IP
address. You must enter the last octet only.
• If you wish, you can change the network name of your RouteFinder. If your ISP
requires your device to have a name, you may use the value entered in this field.
•Click Next>> to continue. The device will search the network to ensure that the IP
address is valid. This may take several seconds.
Note: If your ISP provided you with an IP address, do not enter that address in this
field. Enter the IP address for this device on your local network. Refer to the Glossary
in this User Guide for additional information on IP addressing.