Filter
Top Products
1
2
Operating the Machine
Scanning 2-15
Specify the FTP shortcut.
3
If you loaded the document in the ADF, this concludes the procedure.•
If you loaded the document on the document glass, load the next document, and press [Next •
Doc]. To finish scanning, press [Complete].
Scanning to USB Memory
You can scan a document to a USB memory device that is directly connected to the
machine.
USB memory
Note
Only USB memory formatted with FAT12, FAT16, or FAT32 can be used.•
Support cannot be guaranteed with USB memory with embedded security functions, •
memory card readers connected via USB, USB memory connected via an extension
cable and USB hub, and/or USB memory that does not meet USB standards.
If the USB memory becomes full during the scanning process the entire scan job •
will be deleted. Therefore, make sure that the USB memory has enough free space
in advance.
If you want to connect the USB memory via an extension cable, use a cable that is •
shorter than three meters.