Filter
Top Products
Chapter 2 Configuration and Installation
© National Instruments Corporation 2-5 NI 7340 User Manual
♦ PCI-7340
1. Power off and unplug the computer.
Caution To protect yourself and the computer from electrical hazards, the computer must
remain unplugged until the installation is complete.
2. Remove the cover to expose access to the PCI expansion slots.
3. Choose an unused 5 V PCI slot, and remove the corresponding
expansion slot cover on the back panel of the computer.
4. Touch a metal part on the computer case to discharge any static
electricity that might be on your clothes or body before handling the
controller. Static electricity can damage the controller.
5. Gently rock the controller into the slot. The connection may be tight,
but do not force the controller into place.
6. If required, screw the mounting bracket of the controller to the back
panel rail of the computer.
7. Replace the cover.
8. Plug in and power on the computer.