Filter
Top Products
© National Instruments Corporation 2-1 6527 User Manual
2
Installing and Configuring
the 6527
This chapter describes how to install and configure your 6527 device.
Installing Software
This section describes how to install your software.
Note
Install your software before you install your 6527 device.
If you are using NI-DAQ, refer to your NI-DAQ release notes for specific
instructions on the software installation sequence. Find the installation
section for your operating system and follow the instructions given there.
If you are using LabVIEW, LabWindows/CVI, or other National
Instruments application software packages, refer to the appropriate release
notes for exact directions on installing your software. After you have
installed your application software, refer to your NI-DAQ release notes
and follow the instructions given there for your operating system and
application software package.
Installing the 6527
This section describes how to install your hardware.
Note
Install your software before you install your 6527 device.
The following are general installation instructions for each device. Consult
your computer or chassis user manual or technical reference manual for
specific instructions about installing new devices in your computer or
chassis.
Note
Follow the guidelines in your computer documentation for installing plug-in
hardware.