Filter
Top Products
Chapter 2 Hardware Overview of the NI 783xR
© National Instruments Corporation 2-15 NI 783xR User Manual
Connecting Analog Output Signals
The AO signals are AO <0..n> and AOGND.
AO <0..n> are the AO channels. AOGND is the ground reference signal for
the AO channels.
Figure 2-9 shows how to make AO connections to the NI 783xR.
Figure 2-9. Analog Output Connections
Digital I/O
You can configure the NI 783xR DIO lines individually for either input or
output. When the system powers on, the DIO lines are high impedance. To
set another power-on state, you can configure the NI 783xR to load a VI
when the system powers on. The VI can then set the DIO lines to any
power-on state.
Load
VOUT 0
+
–
AOGND0
NI 783
x
R
AO0
Channel 0