Filter
Top Products
Performing a Full Installation of Windows NT Server 4.0
5-10 Installing Microsoft Windows NT Server 4.0
Completing User and Server Information
Continue the installation by completing user and server specific information.
Follow these steps:
1. When the Windows NT Setup screen displays, press Enter.
2. When prompted, enter your name and organization, and select NEXT to
continue.
3. Select the licensing mode that suits your organization, and select NEXT to
continue.
4. When prompted to specify this system’s unique name, enter the name, and
select NEXT.
Note: Do not include any spaces or backward slashes in the system
name.
5. When prompted to select whether this system is to be a Primary Domain
Controller, Backup Domain Controller or a Stand-Alone Server, select the
appropriate button, and select NEXT.
6. Enter a password for the Administrator account. You need to enter the
password twice. When finished, select NEXT. If the password is left
blank, you are prompted to confirm.
7. To create an Emergency Repair Disk, select NEXT.
8. When prompted to select the operating system components you would like
to install, make your selections, and select NEXT.
9. When the Windows NT Setup Status Screen displays, select Next to
continue.
Installing the Network
Continue the installation by installing the network. Follow these steps:
1. Select how your server will participate on the network, and select NEXT.
2. When prompted if you would like to install Microsoft’s Internet
Information Server, make your selection, and select NEXT.