Filter
Top Products
4-24 CRU Replacement and Server Upgrades
Installing a PCI Module
1. Observe the safety and ESD precautions listed at the beginning of this
chapter.
2. Position the locking latches on the front of the PCI module in the unlocked
position.
3. With the assistance of another person, support the PCI module with both
hands and carefully slide it into the chassis until it is firmly seated in its
connector.
4. Push the locking handles all the way their locked position. See Figure 4-24.
Figure 4-24. Locking the PCI Module in the Chassis.
5. Hand-tighten the two thumbscrews that fasten the PCI module locking
latches to the cabinet.
Note: Hand-tighten the thumbscrews only as much as
required to activate the interlock switch that allows power to
be applied to the CPU module.
7. Close and lock the front door on the tower cabinet or front covers on the
rack-mount system. See Opening and Closing the Front Bezel earlier in this
chapter.