Filter
Top Products
CRU Replacement and Server Upgrades 4-7
Rack-mount Model
The rack-mount model server is equipped with a detachable front bezel. See
Figure 4-2.
Detach
Follow the steps below to detach the front bezel:
1. Insert the security key into the slot and turn it with a little pressure to release
the lock.
LockRelease
Figure 4-2. Unlocking the Front Bezel (Rack-mount Model)
2. Hold the right side of the front bezel lightly and pull it open.
3. Detach the bezel from the main unit by sliding it to the left a little to
disengage the tabs from the frame. See Figure 4-3.
Tabs Frame
Figure 4-3. Opening the Front Bezel (Rack-mount Model)
Attach
To attach the front bezel, engage the tabs on the frame on the left side of the
main unit. After attaching and closing the front bezel, lock it with the key for
security.