5-32 Problem Solving
Table 5-3. POST Error Codes and Messages (continued)
Error Code and Message Description Action
0C00
Rompilot reports error number
xx
• Configuration error in
SETUP.
• CPU/PCI module board is
faulty.
• Re-configure Rompilot.
• Replace the CPU/PCI module
board.
8600 No working DQS value found • DIMM is faulty
• DIMM is not supported
• Replace DIMM
• Replace DIMM with
appropriate one.
8610 MAC Address update failed –
CoreI/O#010/100Mbit Ethernet COntroller
FRB2 timeout occurred
when setting MAC address,
and rewrite was
unsuccessful.
• Replace the back panel board.
• Replace the PCI module
board.
8611 MAC Address update failed – CoreI/O#0
Gbit Ethernet COntroller
FRB2 timeout occurred
when setting MAC address,
and rewrite was
unsuccessful.
• Replace the back panel board.
• Replace the PCI module
board.
8612 MAC Address update failed –
CoreI/O#110/100 Mbit Ethernet Controller
FRB2 timeout occurred
when setting MAC address,
and rewrite was
unsuccessful.
• Replace the back panel board.
• Replace the PCI module
board.
8613 MAC Address update failed – CoreI/O#1
Gbit Ethernet Controller
FRB2 timeout occurred
when setting MAC address,
and rewrite was
unsuccessful.
• Replace the back panel board.
• Replace the PCI module
board.