Filter
Top Products
98 SuperScript 4650 Series — User’s Guide
ALERT Message Explanation
Booting… First message to appear when the printer is powered up.
OUT OF PAPER One of the paper trays is empty
TRAY 2 UNSUPPORTED SIZE Paper Tray 2 contains paper size that is not supported by the engine.
PAPER MISMATCH LOAD
<Paper Size> TRAY
Paper Tray 1 or 2 does not have the correct paper size as specified for the print
job. Load the paper size shown on the display <Letter, Legal, A4, B5JIS, B5ISO,
EXEC, FOLIO, FSCAP, SPFOLI, QUARTO, COM-10, or DL>.
<K, Y, M, or C> TONER EMPTY Specified Toner Module is empty. Replace it with a new one.
<K, Y, M, or C> TONER NOT FOUND Specified Toner Module is not installed or installed incorrectly. Reinstall it.
PAPER JAM DRUM Paper jam in Transfer Drum area.
PAPER JAM INNER/DRUM Paper jam in back transfer area.
PAPER JAM EXIT/DRUM Paper jam in Output Tray.
MISFEED Paper misfeed from Paper Tray 1 or Paper Tray 2.
CHECK WASTE TONER Waste Toner (Toner Collector) is full or is not installed.
REPLACE FUSER OIL Fuser Oil Bottle needs replacing.
REPLACE FUSER ROLLER Fuser Cleaning Roller needs to be replaced.
MISPRINT HW FAULT Printing error caused by no PRREQ-N within a page. Resend the print job.
BELT CARTRIDGE NOT FOUND Belt Cartridge (OPC) is not installed.
FUSER UNIT NOT FOUND Fuser Unit is not installed.
FUSER ROLLER NOT FOUND Fuser Cleaning Roller is not installed.
FRONT COVER OPEN Front Cover is open.
BACK COVER OPEN Back Cover (containing Transfer Unit) is open.
TOP COVER OPEN Top Cover is open.
LOW FUSER OIL Fuser oil is low. Fuser Unit has about 30 pages of operation remaining.
NEAR END FUSER ROLLER Fuser Cleaning Roller has about 1000 pages of operation remaining.
REPLACE BELT Belt Cartridge worn out.
REPLACE FUSER UNIT Fuser Unit reaches end-of-life.
K-TONER LOW Black Toner Module has less than 300 pages of operation remaining.
<Y, M, or C> TONER LOW Specified Toner Module has less than 500 pages of operation remaining.
120K SERVICE Paper Discharger, Drum Cleaner, Transfer Roller, Transfer Drum, and Paper
Pick-up Roller (in back of Paper Trays) all need to be replaced by technician.
CASSETTE OUT <TRAY 1 or 2> Paper Tray 1 or 2 is not installed in feeder.
MEDIA MISMATCH LOAD <MEDIA> TRAY Tray does not have the correct media as specified for the print job. Load the
media shown on the display <Paper, Label, or OHT (Transparency/OHP)>.