Filter
Top Products
3-34 Configuring Your System
Parameters
The SCSISelect utility to configure the internal SCSI controller of the server has the following
menu items and parameters. Read descriptions to select a correct parameter for each menu item.
For configuration of optional SCSI controllers and connected SCSI devices, see the section
"Configuring SCSI Controller on Optional Board" described later.
SCSI Bus Interface Definitions
To set three menu items under "SCSI Bus Interface Definitions", select a menu item with the
cursor keys (↓
↓↓
↓ or ↑
↑↑
↑) and press Enter to fix the item. Use the cursor keys (↓
↓↓
↓ or ↑
↑↑
↑) for parameter
selection. The following table lists menu items, available parameters, and descriptions.
Menu item Parameter Description
Host Adapter SCSI ID 0 - [7] - 15 Select "7".
SCSI Parity Checking [Enabled]
Disabled
Select "Enabled".
Host Adapter SCSI
Termination
[Enabled]
Disabled
Enable or disable the SCSI termination.
Select "Enabled".
[ ]: Factory-set