Filter
Top Products
1-10 System Overview
STATUS lamp
indication
Description Action
On (green) The server is operating normally. –
Flashing
(green)
•
The server is operating with the
memory or CPU in degraded
state.
•
A 1-bit memory error occurs
frequently.
Identify the device in degraded state
by using the BIOS setup utility
"SETUP," and replace it as soon as
possible.
Power is off. –
POST is in progress. Wait while POST is checking the
system. The STATUS lamp turns
green when POST is completed.
CPU error occurred.
CPU temperature alarm was
detected. (Thermal-Trip)
A timeout occurred when the time
set for the watchdog timer was
reached.
An uncorrectable memory error was
detected.
PCI system error occurred.
PCI parity error occurred.
CPU bus error occurred.
Turn the power off and on. If the
POST screen displays an error
message, record the message, and
contact your service representative.
Off
A memory dump request was
issued.
Wait until the memory dump is
completed.
A temperature alarm was detected. Check if the internal fans are clean
and if the fan units are firmly
connected.
If the STATUS lamp indication does
not change when the fans are
operating correctly, contact your
service representative.
A voltage alarm was detected.
On (amber)
All the power supply units failed.
Contact your service representative.
Flashing
(amber)
A fan alarm was detected. Check if the fan units are firmly
connected.
If the STATUS lamp indication does
not change when the fans are
operating correctly, contact your
service representative.
A temperature warning was
detected.
Check if the internal fans are clean
and if the fan units are firmly
connected.
If the STATUS lamp indication does
not change when the fans are
operating correctly, contact your
service representative.