Filter
Top Products
Setting Up Your System 2-11
2.
Hold the rail assembly and secure the front of the rail assembly with one screw and the
rear of the rail assembly with two screws, while holding the rail assembly.
NOTE:
Confirm that the rail assemblies are located at the level.
Secure the rear of the assembly after adjusting the depth of the rack and length of the rail
assembly.
3.
Install another rail assembly on the rack in the same way as described in steps 1 and 2
above.
NOTE: Confirm that the rail assembly is installed at the same level as that
of the rail assembly already installed.
FRONT REAR
Screw
Used to support the set
screw of the server