NEC 5800 Server User Manual


 
6-6 Troubleshooting
On-screen error message Description Action
113 Hard disk 0 Error
114 Hard disk 1 Error
Hard disk error Contact your service representative
to replace the system board, SCSI
back-plane, or hard disk.
115 Hard disk 2 Error Hard disk error
116 Hard disk 3 Error
Contact your service representative
to replace the system board, SCSI
back-plane, or hard disk.
117 CD-ROM disk 0 Error CD-ROM disk error
118 CD-ROM disk 1 Error
119 CD-ROM disk 2 Error
11A CD-ROM disk 3 Error
Contact your service representative
to replace the system board or the
CD-ROM drive.
11B Date/Time not set
The date and time are not
set.
Activate the BIOS SETUP utility to
set the date and time.
11E Cache memory bad Cache memory error
Install the CPU (processor)
correctly.
Contact your service representative
to replace the CPU.
120 CMOS clear The CMOS contents were
cleared.
121 Password clear The password was cleared.
Activate the BIOS SETUP utility to
set the CMOS or password.
Contact your service representative
to replace the system board.
140 PCI Error PCI board error
141 PCI Memory Allocation
Error
PCI board memory
allocation error
142 PCI IO Allocation Error PCI board I/O allocation
error
Securely install the PCI boards and
PCI riser card.
Contact your service representative
to replace the PCI board, system
board, or PCI riser card.
143 PCI IRQ Allocation Error PCI board interrupt error
144 Shadow of PCI ROM
Failed
PCI board shadow ROM
error
Activate the BIOS SETUP utility to
set the PCI board.
Securely install the PCI boards and
PCI riser card.
Contact your service representative
to replace the PCI board, system
board, or PCI riser card.
145 PCI ROM not found The expanded ROM on the
PCI board cannot be
detected.
Securely install the PCI boards and
PCI riser card.
Contact your service representative
to replace the PCI board, system
board, or PCI riser card.
146 Insufficient Memory to
Shadow PCI ROM
The area for extending the
expanded ROM on the PCI
board is insufficient.
For PCI boards which do not need
to be bootable, activate the BIOS
SETUP utility to disable extension
of the expanded ROM on the PCI
board. Securely install the PCI
boards and PCI riser card.
Contact your service representative
to replace the PCI board, system
board, or PCI riser card.