Filter
Top Products
4-14 Installing the Operating System
Install PROSet II
PROSet II is a utility that enhances the functionality of the network driver. Utilizing PROSet II
enables the following issues:
!
Provides detailed adapter information.
!
Provides diagnostic capabilities: loop back test, packet transmission test and so on.
!
Provides support for adapter teaming.
Configuring several network adapters as a single team provides the server an environment that is
tolerant of adapter failures and enhances through put across the teamed adapters.
Follow the procedure below to install PROSet II.
1.
Insert the EXPRESSBUILDER CD into the CD-ROM drive.
2.
When the EXPRESSBUILDER window appears, click "Driver & Utilities" on the "EB
ToolBar".
3.
Select Intel, click on "PROSet II for Windows 2000" under Intel Advanced Network
Services.
The [Intel (R) PROSet II Setup] dialog starts.
4.
In the [Welcome] window, click [Next].
If the dialog message "Digital Signature could not been found." appears, select [Yes].
5.
Click [Finish].
[Intel (R) PROSet II Setup] has completed.
6.
Restart the system.
Graphic Accelerator Driver
Update the installed standard graphic accelerator driver.
If you want to utilize an optional Graphic Accelerator Driver board, follow the instructions
provided with the board to install the driver.
1.
Insert the EXPRESSBUILDER CD into the CD-ROM drive.
2.
When the EXPRESSBUILDER windows opens, click "Drivers & Utilities" on the "EB
Toolbar".
3.
Select ATI. Click on "Rage XL Driver for Windows 2000."
4.
Follow the displayed messages to continue the installation.
If the dialog message "Digital Signature could not been found." appears, select [Yes] to
continue.
5.
Remove the EXPRESSBUILDER CD from the CD-ROM drive, follow the directions on
the screen and restart the system.