Filter
Top Products
B-6 System Setup Utility
System Setup Utility Main Menu Window
Resource Configuration Add-in (RCA) Window
The RCA provides three major functions.
Creates representations of devices that cannot be discovered by the
system (ISA cards)
Modifies the contents of the system by adding and removing devices
Modifies the resources used by devices.
You can use the RCA window to define an ISA board or add an ISA board by
clicking on the appropriate button. Removing an ISA card requires that the card
be highlighted in the Devices section of the screen before clicking on the button.
You can add only as many ISA boards as ISA slots allow (your server has one
ISA slot).
Use the following steps to define or add an ISA board.
1. From the SSU main window, launch the RCA by selecting the “Resources”
task under the RCA heading in the task box. Click OK.
2. When the RCA window appears, it displays messages similar to the
following:
Baseboard: System Board
PCI Card: Bus 00 dev 00 –- Host Processor Bridge
PCI Card: Bus 00 dev 0D –- Multifunction Controller
PCI Card: Bus 00 dev 0F –- Ethernet Controller
PCI Card: Bus 00 dev 12 –- SCSI Controller
PCI Card: Bus 00 dev 14 –- VGA Controller