Filter
Top Products
2-8 Setting Up Your System
To unplug the power cord, slide the lock away from the plug while
carefully pulling it out of the socket. Do not pull on the cord, only the
plug.
2. Plug the male end of the power cord into a wall-mounted power outlet.
Plug the male end of the power cord into an NEMA 5-15R outlet for
100-120 Vac.
Plug the male end of the power cord into an NEMA 6-15R outlet for
200-240 Vac.
If the power cords supplied with the system are not compatible with the AC wall
outlets in your region, obtain suitable power cords that meet the following
criteria.
The power cord must be rated for the available AC voltage and have a
current rating that is at least 125% of the current rating of the system.
The power cord connector that plugs into the wall outlet must be
terminated in a grounding-type male plug designed for use in your region.
It must have certification marks showing certification by an agency
acceptable in your region.
The power cord connector that plugs into the system must be an
IEC type CEE-22 female connector.
The power cord must be less than 1.8 meters (6.0 feet) long.
!
WARNING
Your system ships with two power cords, one for each power
supply. Do not attempt to modify or use the supplied AC
power cords if they are not the exact type required.
Powering On the System
Power on your system as follows.
1. Make sure all external devices (monitor, keyboard, mouse) and power cords
are connected.
2. Make sure both AC power supply cords are connected to the system and
power outlets.
3. Power on the monitor and any other external devices.
4. Press the dc push-button power on/off switch on the front panel.
Verify that the dc power-on LED on the front panel is lit. If it is not lit,
ensure that the AC power cords are connected to functional AC power
sources.