Filter
Top Products
4-20 Upgrading Your System
C
B
A
A. ISA connector (use half-length board only)
B. Six PCI connectors (top to bottom in figure)
First four connectors: PCI B3, B2, B1, B0
Next two connectors: PCI A3, A2
C. PCI connector A1 (use half-length board only)
Locating the PCI and ISA Slots
Installation Considerations
Newer ISA boards, designed for Plug-and-Play systems, are automatically
configured by the system without any user intervention. Older ISA boards must
be manually configured. Once the manual configuration is complete, the Plug-
and-Play boards are configured around the manually configured boards without
causing any resource conflicts.
The ISA boards that are not Plug-and-Play must be manually configured
following the instructions supplied with the board. The configuration is defined
to the system by creating the ISA configuration file when running the SSU. If
adding a non-Plug and Play ISA option board, run the SSU before installing the
board (see Appendix B, “System Setup Utility”).