Filter
Top Products
Setting Up Your System 2-3
The site must be isolated from strong electromagnetic fields and electrical
noise produced by electrical devices such as air conditioners, large fans,
large electric motors, radio and TV transmitters, and high-frequency
security devices.
Provide at least eight inches (20.32 centimeters) behind the system and
three inches (eight centimeters) on each side of the system for proper
cooling, airflow, and cable clearance.
Site the system so that it is easily accessible for system maintenance and
installation of system upgrades.
With the site selected, unpack and set up the system as described next.
Unpacking the System
!
WARNING
Your system weighs approximately 85 pounds (38.25 kg),
minimum configuration. If your system contains optional
boards and peripheral devices, it may weigh up to 100
pounds (45.4 kg). To avoid personal injury, make sure you
have someone help you lift or move the system.
When you receive your system, inspect the shipping carton(s) prior to
unpacking. If the shipping carton(s) is damaged, note the damage, and if
possible, photograph it for reference.
After removing the contents of the carton(s), inspect for damage. If the contents
appear damaged, file a damage claim with the carrier immediately. Keep the
cartons and the packing materials.
Check that you have all the parts listed on the packing slip. If any are missing,
contact the dealer where you purchased the system.
Set the system where you can easily look at the front and rear. Take a few
minutes and become familiar with the system’s controls, indicators, and
connectors (see “Getting Familiar with the System,” next).