Filter
Top Products
Configuring Your System 3-17
Symbios SCSI Utility Main Menu
. Status
Adapter Port No IRQ Level Current Next Boot NVRAM Found
SYM53C810 2000 11 On On Yes
SYM53C896 3000 11 On On* Yes
SYM53C896 3400 11 On On Yes
Change Adapter Status – Press ENTER to change adapter Next Boot Status.
Adapter Boot Order – Press ENTER to select and change boot order of each SCSI adapter.
Additional Adapter Configuration – Not used.
Display Mode-Verbose – Press ENTER to change display mode.
Mono/Color – Press ENTER to change display from black/white to color.
Language
Help
Quit
*Next Boot Status for this controller must be turned OFF if you install the optional Mylex AcceleRAID 250 Controller board in
your system. Refer to “Change Adapter Status” above.
The following keys are active for all SCSI Configuration screens:
Active Keys
Key Action
Arrows Up and down arrows move from one parameter to another
within a screen.
Enter Displays options for a configurable parameter. Selects an
option.
Esc Moves back to previous screen or parameter or EXIT if at
the Main menu.
Changing the Adapter and Device Configurations
The SCSI Configuration Utility Main Menu lists the onboard SCSI adapters and
shows their current settings. The adapters control the operation of the SCSI
devices in your system (hard disk drives or removable media devices).
1.
Highlight an adapter and press
Enter
.
2.
Select “Adapter Setup” and press
Enter
. The Adapter Setup screen displays.