Filter
Top Products
1-14 Introduction
SYSTEM BIOS SETUP PROGRAM
This section provides the outline features and operation of the Phoenix BIOS Setup pro-
gram used in the NEC Versa 2500 Series. The BIOS (Basic Input-Output System) Setup
program allows you to change the system configuration settings such as the current date
and time, the disk drive and ports settings, and the power management as well.
As POST (Power-On Self Test) executes during boot up process, the screen will display the
following message:
Press F2 to Enter SETUP
Press the
F2
key to run the BIOS Setup program. The BIOS Setup program is organized
into two pages of menus. Change settings using the PgDn and PgUp keys. To move from
one option to another, you use the up and down arrow keys while using the spacebar and
-
keys to change the settings.
To exit the BIOS Setup program, simply press the
Esc
key and select from the listed
choices window whether you want to load the default values for all fields; save your
changes and exit; or exit without saving any changes.
THE BOOT SETUP MENU
The boot setup menu allows you to change the following configurations:
Figure 1-16 The Bootup Setting Menu
SOLD BY laptopia2005 DO NOT RESELL!!
SOLD BY laptopia2005 DO NOT RESELL!!