Filter
Top Products
Introduction 1-21
1.
Copy the
PHLASH.COM & PLATFORM.BIN
BIOS utility program and the BIOS
ROM file to the hard disk subdirectory. You can also choose to run the program
from the diskette.
2.
Disable EMM386 or other memory manager programs before restarting the com-
puter. When booting DOS, press
F5
to bypass the
CONFIG.SYS
and
AUTOEXEC.BAT
. You may also choose to boot from Drive A: with a clean DOS
diskette.
3.
At the DOS prompt, type “
PHLASH <
BIOSfilename
.ROM>”
to activate Flash
BIOS programming utility. The computer then prompts you again before starting
to update the system BIOS. After programming is complete, the system prompts
you to reboot the computer to activate the new system BIOS.
SOLD BY laptopia2005 DO NOT RESELL!!
SOLD BY laptopia2005 DO NOT RESELL!!