Filter
Top Products
Field Service Guidelines 4-3
Do not drop the battery packs or subject them to excessive shock and vibration.
Do not expose the battery packs to direct sunlight, moisture, or chemical com-
pounds.
Do not disassemble the battery packs.
Do not use the battery packs to power other devices.
Do not short the battery leads or connect the battery with reversed polarity.
Never attempt to charge the battery packs in any way other than as described in
this manual and the user’s guide.
Always charge the battery packs as soon as possible after a low battery indication.
Maintaining the LCD Quality
Heat is the most common problem associated with the screen. After a lengthy work session,
the typical routine is to shut down the machine and close the cover, but the display surface
(no matter what type it is) and the components inside the computer radiate heat. So, when
you close the cover, you will then trap this heat up against the screen. Leaving the computer
cover open for about ten minutes while the heat disperses eliminates this potentially damag-
ing situation.
REQUIRED TOOLS AND EQUIPMENT
All NEC Versa 2500 Series corrective maintenance procedures can be performed using the
following tools:
tweezers
small flat-blade screwdriver
small Phillips screwdriver
small Hex-bolt screwdriver.
NOTE: All boards, options and peripherals
contain components that are sensitive to static
electricity. When handling any of these items,
protect against static discharge by using wrist or
ankle grounding straps and grounded working
mats. When moving or storing items, use the
anti-static bags supplied with the items.
SOLD BY laptopia2005 DO NOT RESELL!!
SOLD BY laptopia2005 DO NOT RESELL!!