Filter
Top Products
4-12 Field Service Guidelines
Figure 4-5 The I/O Board Module Assembly
Removing/Replacing the Power Board
The procedure for removing the power board is as follows:
1.
Turn off the computer. Follow all disassembly procedures mentioned from the
start of this section.
2.
Remove the two hex spacers from the center of the board and lift the module from
the unit.
3.
To replace the power board module, reverse the removal procedures mentioned
above.
Figure 4-6 Power Board Module Assembly
SOLD BY laptopia2005 DO NOT RESELL!!
SOLD BY laptopia2005 DO NOT RESELL!!